Pressure transmitters for RELATIVE, ABSOLUTE and VACUUM measures Nominal pressures from 100 mbar to 2000 bar AMPLIFIED outputs: 4-20mA, 10V or 5Volt Linearity and hysteresis 0,20%
The pressure transmitters of this series are characterized by high reliability and long-term stability High mechanical strength, suitable for dynamic applications The sensitive part in contact with pressure, is entirely made of 17-4 PH stainless steel resistant to corrosion Protection class IP65 Process coupling 1/4″ GAS Male Connector standard DIN 43650 Internal adjustment of ZERO Power supply 12 to 24 Vdc
ACCESSORIES
Calibration Report
ACCREDIA certificate
NEW PERFORMANCES “THE EVOLUTION OF THE SPECIES” : after more than 30 years of service in the various versions the new MP2Plus is born. MP2Plus is a Professional Digital Indicator with 1 (standard)or 2 (option) inputs, suitable for receiving signals from strain gauge sensors, transmitters with voltage or current output, PT100, potentiometer, ENCODER and LVDT. Particularly suitable for both static and dynamic applications, for calibration and verification in metrology laboratories or industrial environments where it is necessary to make measurements of WEIGHT, FORCE, PRESSURE, TORQUE, DISPLACEMENTS, ANGLE, SPEED and TEMPERATURE. To FIT EVERY APPLICATION the instrument can be configured and customized: the function keys F1, F2, F3 and F4 can be programmed for the function of interest such as: PEAK, HOLD, RELEASE, TX DATA DATALOG, DISCHARGE, ZOOM. Each input channels can be supplied in 7 different configurations:
On request FIELDBUS communication selectable among : DeviceNet, CANopen, EtherNet/IP, PROFIBUS, PROFINET to be connected inside a standard PLC network. NEW COUNTING function
Panel digital indicator designed to be used in the modern static and dynamic measure systems in industrial activity, it can sample the signal up to a frequency of 1200Hz.
Suitable for processing analogue signals coming from strain gauge based load cells and from pressure transmitters with amplified output, it enables to perform measurements with a long-term accuracy of 0.02% of full scale, with a resolution of ±20.000 divisions 2mV/V
Suitable for measuring FORCE, WEIGHT, PRESSURE, DEPRESSION (vacuum), TORQUE and DISPLACEMENT.
“THE EVOLUTION OF THE SPECIES” : after more than 20 years of service in the various versions the new MP6Plus is born. MP6Plus is a Professional Digital Laboratory Indicator with 1, 2, 3, or 4 inputs, suitable for receiving signals from strain gauge sensors, transmitters with voltage or current output and PT100. Particularly suitable for both static and dynamic applications, for calibration and verification in metrology laboratories or industrial environments where it is necessary to make measurements of weight, force, pressure, torque, displacement and temperature in a synchronized manner. To FIT EVERY APPLICATION the instrument can be configured and customized: the function keys F1, F2, F3 and F4 can be programmed for the function of interest such as: PEAK, HOLD, RELEASE, TX DATA DATALOG, DISCHARGE, ZOOM. MP6Plus allows you to enable and disable each channel and using the ZOOM function it s possible to display only the channel of interest in full screen. The instrument works with a resolution of ±100.000 divisions and an accuracy better than 0.005% due to an internal 24-bit Sigma-Delta AD converter and a measurement control that is carried out for switching at a frequency equal to that of sampling: this system provides a better suppression of interference due to offset drift and to the connecting cables
LAT N. 093
Calibration Centre
FORCE - PRESSURE - TORQUE
