Displacement transducers for linear measurement
Nominal displacement from 5 mm to 200 mm
Linearity and Hysteresis 0,10%
Standar output 2mV/V
LOW COST and EASY APPLITATIONS
Applied in the industrial field, in the laboratory in the geotechnical field for the measurement of displacement and length of mechanical components.
High mechanical resistance
High resolution measurement
Completely made of stainless steel
Degree of protection IP40
Satndar output M12 connector
Long term stability
ACCESSORIES
PVC shielded cable 3m complete with molded M12 connector 4 poles
Calibration Report
LDT + STATAORE
LDTUSB +PC
“THE EVOLUTION OF THE SPECIES” : after more than 20 years of service in the various versions the new MP4Plus is born. MP4Plus is a Professional Digital Indicator with 4 inputs, suitable for receiving signals from strain gauge sensors, transmitters with voltage or current output and PT100. Particularly suitable for both static and dynamic applications, for calibration and verification in metrology laboratories or industrial environments where it is necessary to make measurements of weight, force, pressure, torque, displacement and temperature. To FIT EVERY APPLICATION the instrument can be configured and customized: the function keys F1, F2, F3 and F4 can be programmed for the function of interest such as: PEAK, HOLD, RELEASE, TX DATA DATALOG, DISCHARGE, ZOOM. MP4Plus allows you to enable and disable each channel and using the ZOOM function it s possible to display only the channel of interest in full screen. The instrument works with a resolution of ±100.000 divisions and an accuracy better than 0.005% due to an internal 24-bit Sigma-Delta AD converter and a measurement control that is carried out for switching at a frequency equal to that of sampling: this system provides a better suppression of interference due to offset drift and to the connecting cables.
The transmitter makes simple and economical the transmission of data coming from up to 2 load cells, transducers or potentiometers to a PC. TA2USB has a maximum resolution of ±50.000 divisions and transmits the data directly on-line USB 2.0. It is a very simple but complete instrument as it is self powered directly from the USB line and is ideal as acquisition system connected to a PC. The transmitter is controlled by a microcontroller that processes the data sampled by two 24bit ADC converters (one for each channels) at a frequency from 5 to 4800Hz. The instrument continuously transmits the value in divisions according to a protocol highly optimized and easy to implement and allows to get in real-time all the internal acquisition data. Accuracy 0,010% 
LAT N. 093
Calibration Centre
FORCE - PRESSURE - TORQUE
