The transducer consists of a STRAIN CYLINDER and a FORCE transducer used for the calibration and auto alignment of the joints as well as for the force centering of compression test machines on hardened concrete.
Executed according to the norm references: UNI EN 12390-4 and DIN 51302-2.
Nominal Load 3 MN
Class (ISO 376) 1
Linearity and Hysteresis 0,05%
Output: 2mV/V
Column force transducer suitable for the calibration of material testing machines.
High mechanical resistance.
Completely made of stainless steel.
Completely LASER welded.
Degree of protection IP65.
Long term stability.
ACCESSORIES
Calibratio Report
ACCREDIA certificate
Calibration Report according to the norm references:
UNI EN 12390-4 and DIN 51302-2
Professional ergonomic indicator extremely versatile and easy to be used for measurement of FORCE, WEIGHT, PRESSURE (gas), VACUUM, TORQUE and DISPLACEMENT. It is possible to integrate inside a force sensor (up to max. 5kN) or a pressure sensor (relative, absolute or differential up to max. 5bar) while from the external input it is possible to connect strain gauges sensors with output in mV/V such as: load cells, force transducers, pressure transducers, torque and displacement transducers. AUTOMATIC recognition of FORCE, WEIGHT, VACUUM, PRESSURE, TORQUE and DISPLACEMENT external transducers (max. 7) LCD graph DISPLAY with 3 levels of backlighting to adapt itself to any conditions of external brightness and with the possibility of rotating the visualization of 180°. DIGITAL CALIBRATIONS protected by Password with full scale programming or with the “LINEARIZATION by points” of transducers, for every transducer it is possible to separately calibrate both the positive and the negative field. (Example: Tension and Compression) DATALOGGER allows to memorize measurements and to keep them in the internal memory even in case of instrument switching off. (max. 130.000 recordings)
Laboratory digital indicator is a programmable instrument for the treatment of signals from strain gauge full bridge transducers, that allows the measurement of forces, mass, pressure, torque moments and displacements. It has been designed to be used in the most modern systems of static and dynamic measurement of high precision, such as metrology laboratories, materials testing machines, test benches or test etc. … It is ideal to be used as first-line standard, if periodically certified by calibration laboratories or equivalent centers (ACCREDIA in Italy). MP10 has an accuracy of 0.0010% or 0.0020%, 24-bit internal resolution and combines a resolution (with signal ± 2 mV/V) of ± 2.000.000 divisions in the K2 version (± 200.000 divisions in the standard version). DATA LOGGER inside
“THE EVOLUTION OF THE SPECIES” : after more than 20 years of service in the various versions the new MP6Plus is born. MP6Plus is a Professional Digital Laboratory Indicator with 1, 2, 3, or 4 inputs, suitable for receiving signals from strain gauge sensors, transmitters with voltage or current output and PT100. Particularly suitable for both static and dynamic applications, for calibration and verification in metrology laboratories or industrial environments where it is necessary to make measurements of weight, force, pressure, torque, displacement and temperature in a synchronized manner. To FIT EVERY APPLICATION the instrument can be configured and customized: the function keys F1, F2, F3 and F4 can be programmed for the function of interest such as: PEAK, HOLD, RELEASE, TX DATA DATALOG, DISCHARGE, ZOOM. MP6Plus allows you to enable and disable each channel and using the ZOOM function it s possible to display only the channel of interest in full screen. The instrument works with a resolution of ±100.000 divisions and an accuracy better than 0.005% due to an internal 24-bit Sigma-Delta AD converter and a measurement control that is carried out for switching at a frequency equal to that of sampling: this system provides a better suppression of interference due to offset drift and to the connecting cables
LAT N. 093
Calibration Centre
FORCE - PRESSURE - TORQUE
