QUICK ANALYZER

Software for monitoring analyzing and recording the run of tests which can involve up to 16 sensors at the same time. Is possible to have the LIGHT version where is possible to connect only one instrument / sensor.

  • Categories: Software applications
  • Tags:

Quick Analyzer is a powerful software that allows to connect any PC in an easy and efficient way to all AEP transducers instrumentations with serial or USB channels.
Through a simple configuration of channels and effective setting of the characteristics of sensors which instruments are connected, you can check the status of communication, perform tests, saving curves of the obtained graphs, calculate main results of the test and print the certificates.
It is possible to connect up to 16 instruments on the RS232 or USB line. If the PC is not equipped with serial channels simply add USB adapters with which the programme is totally compatible. The curves obtained can be viewed either simultaneously in a single graph respect to the time or to another channel , with different colors and set for easier recognition of same, or individually (respect to the time) for easy analysis of detail of the individual sensor.
The software works with all AEP equipment.

ACCESSORIES

See instrumentation and connection cables

Download

Data sheet Quick Analyzer

You may also like…

  • MP4PLUS

    BUY NOW

    MP4PLUS

    “THE EVOLUTION OF THE SPECIES” : after more than 20 years of service in the various versions the new MP4Plus is born. MP4Plus is a Professional Digital Indicator with 4 inputs, suitable for receiving signals from strain gauge sensors, transmitters with voltage or current output and PT100. Particularly suitable for both static and dynamic applications, for calibration and verification in metrology laboratories or industrial environments where it is necessary to make measurements of weight, force, pressure, torque, displacement and temperature. To FIT EVERY APPLICATION the instrument can be configured and customized: the function keys F1, F2, F3 and F4 can be programmed for the function of interest such as: PEAK, HOLD, RELEASE, TX DATA DATALOG, DISCHARGE, ZOOM. MP4Plus allows you to enable and disable each channel and using the ZOOM function it s possible to display only the channel of interest in full screen. The instrument works with a resolution of ±100.000 divisions and an accuracy better than 0.005% due to an internal 24-bit Sigma-Delta AD converter and a measurement control that is carried out for switching at a frequency equal to that of sampling: this system provides a better suppression of interference due to offset drift and to the connecting cables.

    • Categories: Instruments
    • Tags:

  • STAR

    BUY NOW

    STAR

    Professional ergonomic indicator extremely versatile and easy to be used for measurement of FORCE, WEIGHT, PRESSURE (gas), VACUUM, TORQUE and DISPLACEMENT. It is possible to integrate inside a force sensor (up to max. 5kN) or a pressure sensor (relative, absolute or differential up to max. 5bar) while from the external input it is possible to connect strain gauges sensors with output in mV/V such as: load cells, force transducers, pressure transducers, torque and displacement transducers. AUTOMATIC recognition of FORCE, WEIGHT, VACUUM, PRESSURE, TORQUE and DISPLACEMENT external transducers (max. 7) LCD graph DISPLAY with 3 levels of backlighting to adapt itself to any conditions of external brightness and with the possibility of rotating the  visualization of 180°. DIGITAL CALIBRATIONS protected by Password with full scale programming or with the “LINEARIZATION by points” of transducers, for every transducer it is possible to separately calibrate both the positive and the negative field. (Example: Tension and Compression) DATALOGGER allows to memorize measurements and to keep them in the internal memory even in case of instrument switching off. (max. 130.000 recordings)

    • Categories: Instruments
    • Tags:

  • MP6PLUS

    BUY NOW

    MP6PLUS

    “THE EVOLUTION OF THE SPECIES” : after more than 20 years of service in the various versions the new MP6Plus is born. MP6Plus is a Professional Digital Laboratory Indicator with 1, 2, 3, or 4 inputs, suitable for receiving signals from strain gauge sensors, transmitters with voltage or current output and PT100. Particularly suitable for both static and dynamic applications, for calibration and verification in metrology laboratories or industrial environments where it is necessary to make measurements of weight, force, pressure, torque, displacement and temperature in a synchronized manner. To FIT EVERY APPLICATION the instrument can be configured and customized: the function keys F1, F2, F3 and F4 can be programmed for the function of interest such as: PEAK, HOLD, RELEASE, TX DATA DATALOG, DISCHARGE, ZOOM. MP6Plus allows you to enable and disable each channel and using the ZOOM function it s possible to display only the channel of interest in full screen. The instrument works with a resolution of ±100.000 divisions and an accuracy better than 0.005% due to an internal 24-bit Sigma-Delta AD converter and a measurement control that is carried out for switching at a frequency equal to that of sampling: this system provides a better suppression of interference due to offset drift and to the connecting cables

    • Categories: Instruments
    • Tags: