Professional ergonomic receiver to measure FORCE, WEIGHT, PRESSURE, TORQUE and DISPLACEMENT, extremely versatile and easy to be used. Through an integrated wireless communication system it is possible to directly interface with 1, 2, 3 or 4 WIMOD modules at the same time in the real time. The transmission frequency at 433 MHz makes the communication safe and reliable even in presence of other transmission systems such as mobile phones, walkie-talkie, radio-microphones, remote-controls etc. which usually work on other frequencies by ensuring a covering of approx. 100 meters in free space. WiSTAR is equipped with USB interface for communicating in real time with a PC for recharging the long lasting and highly reliable internal battery (Li-Ion). In addition to the direct reading of the measurements it is possible to detect PEAKS and to block the measurement on the display thanks to HOLD function. LCD graph DISPLAY with 3 levels of backlighting to adapt itself to any conditions of external brightness and with the possibility of rotating the visualization of 180°. DATALOGGER allows to memorize measurements and to keep them in the internal memory even in case of instrument switching off. (max. 130.000 recordings)

Professional ergonomic indicator extremely versatile and easy to be used for measurement of FORCE, WEIGHT, PRESSURE (gas), VACUUM, TORQUE and DISPLACEMENT. It is possible to integrate inside a force sensor (up to max. 5kN) or a pressure sensor (relative, absolute or differential up to max. 5bar) while from the external input it is possible to connect strain gauges sensors with output in mV/V such as: load cells, force transducers, pressure transducers, torque and displacement transducers. AUTOMATIC recognition of FORCE, WEIGHT, VACUUM, PRESSURE, TORQUE and DISPLACEMENT external transducers (max. 7) LCD graph DISPLAY with 3 levels of backlighting to adapt itself to any conditions of external brightness and with the possibility of rotating the  visualization of 180°. DIGITAL CALIBRATIONS protected by Password with full scale programming or with the “LINEARIZATION by points” of transducers, for every transducer it is possible to separately calibrate both the positive and the negative field. (Example: Tension and Compression) DATALOGGER allows to memorize measurements and to keep them in the internal memory even in case of instrument switching off. (max. 130.000 recordings)

Panel digital indicator designed to be used in the modern static and dynamic measure systems in industrial activity, it can sample the signal up to a frequency of 1200Hz.
Suitable for processing analogue signals coming from strain gauge based load cells and from pressure transmitters with amplified output, it enables to perform measurements with a long-term accuracy of 0.02% of full scale, with a resolution of ±20.000 divisions 2mV/V

Suitable for measuring FORCE, WEIGHT, PRESSURE, DEPRESSION (vacuum), TORQUE and DISPLACEMENT.

NEW PERFORMANCES “THE EVOLUTION OF THE SPECIES” : after more than 30 years of service in the various versions the new MP2Plus is born. MP2Plus is a Professional Digital Indicator with 1 (standard)or 2 (option) inputs, suitable for receiving signals from strain gauge sensors, transmitters with voltage or current output, PT100, potentiometer, ENCODER and LVDT. Particularly suitable for both static and dynamic applications, for calibration and verification in metrology laboratories or industrial environments where it is necessary to make measurements of WEIGHT, FORCE, PRESSURE, TORQUE, DISPLACEMENTS, ANGLE, SPEED and TEMPERATURE. To FIT EVERY APPLICATION the instrument can be configured and customized:  the function keys F1, F2, F3 and F4 can be programmed for the function of interest such as: PEAK, HOLD, RELEASE, TX DATA DATALOG, DISCHARGE, ZOOM. Each input channels can be supplied in 7 different configurations:

• ±2mV/V, ±3mV/V
• 4-20mA, 0-20mA
• ±10V, ±5V
• PT100
• ENCODER
• POTENTIOMETER
• LVDT

On request FIELDBUS communication selectable among : DeviceNet, CANopen, EtherNet/IP, PROFIBUS, PROFINET to be connected inside a standard PLC network. NEW COUNTING function

“THE EVOLUTION OF THE SPECIES” : after more than 20 years of service in the various versions the new MP6Plus is born. MP6Plus is a Professional Digital Laboratory Indicator with 1, 2, 3, or 4 inputs, suitable for receiving signals from strain gauge sensors, transmitters with voltage or current output and PT100. Particularly suitable for both static and dynamic applications, for calibration and verification in metrology laboratories or industrial environments where it is necessary to make measurements of weight, force, pressure, torque, displacement and temperature in a synchronized manner. To FIT EVERY APPLICATION the instrument can be configured and customized: the function keys F1, F2, F3 and F4 can be programmed for the function of interest such as: PEAK, HOLD, RELEASE, TX DATA DATALOG, DISCHARGE, ZOOM. MP6Plus allows you to enable and disable each channel and using the ZOOM function it s possible to display only the channel of interest in full screen. The instrument works with a resolution of ±100.000 divisions and an accuracy better than 0.005% due to an internal 24-bit Sigma-Delta AD converter and a measurement control that is carried out for switching at a frequency equal to that of sampling: this system provides a better suppression of interference due to offset drift and to the connecting cables

The transmitter makes simple and economical the transmission of data coming from up to 2 load cells, transducers or potentiometers to a PC. TA2USB has a maximum resolution of ±50.000 divisions and transmits the data directly on-line USB 2.0. It is a very simple but complete instrument as it is self powered directly from the USB line and is ideal as acquisition system connected to a PC. The transmitter is controlled by a microcontroller that processes the data sampled by two 24bit ADC converters (one for each channels) at a frequency from 5 to 4800Hz. The instrument continuously transmits the value in divisions according to a protocol highly optimized and easy to implement and allows to get in real-time all the internal acquisition data. Accuracy 0,010%

The digital transmitter TDA is an instrument designed for the processing of signals from strain gauges in full bridge configuration with 4 or 6 wires and is able to interface with most of the main common field buses such as Modbus RTU, CANopen, DeviceNet and Profibus. For the fieldbus CANopen, Devicenet and Profibus the electronic is galvanically isolated. Besides the selected fieldbus, it has a RS232 serial interface with a communication program already SUPPLIED (WinTDA), allows a fast tool to control the effectiveness of the performance of the transmitter and allows to implement the calibration procedures. Outputi: RS232C – RS485 ModBus – CanOpen – DeviceNet – ProfiBus