
Showing 100–120 of 120 results
-
MICROTC5-AMP
BUY NOWMICROTC5-AMP
Force transducers for the measurement of static loads in COMPRESSION and TENSION
Nominal Load from 1 kN to 10 kN
Linearity and Hysteresis 0,05%SMALL SIZE
Standar output
-
TA2USB
BUY NOWTA2USB
The transmitter makes simple and economical the transmission of data coming from up to 2 load cells, transducers or potentiometers to a PC. TA2USB has a maximum resolution of ±50.000 divisions and transmits the data directly on-line USB 2.0. It is a very simple but complete instrument as it is self powered directly from the USB line and is ideal as acquisition system connected to a PC. The transmitter is controlled by a microcontroller that processes the data sampled by two 24bit ADC converters (one for each channels) at a frequency from 5 to 4800Hz. The instrument continuously transmits the value in divisions according to a protocol highly optimized and easy to implement and allows to get in real-time all the internal acquisition data. Accuracy 0,010%
-
FT1
BUY NOWFT1
SHEAR BEAM load cell for the measurement of static and dynamic loads Nominal Load from 350 kg to 7,5 tons
Class (OIML R60) C2 and C3
Combined Error: 0,020%
Output: 2mV/V -
TA4/2
BUY NOWTA4/2
Transmitters make easy and cheap the remote transmission of strain gauge load cells analogue signals to PLC, PC, recorders, remote indicators etc… until to a distance of 40 meters. The possibility of internally connecting the load cells in parallel (max. 4 of 350Ω or 8 of 700Ω) makes system wiring easier by avoiding the use of junction boxes. It is ideal to be used in the most advanced industrial weighing systems, processes control, dosing (silos and hoppers) and automation thanks to the two versions of its case: hermetic case made of pressure die-cast aluminium (IP65 class) or plastic case for mounting on a DIN guide (suitable for applications inside control panels)
-
TC8
BUY NOWTC8
Force transducers for the measurement of static and dynamic loads in COMPRESSION and TENSION
Nominal Load from 10 kN to 1 MN
Class (ISO 376) 0.5 and 1
Linearity and Hysteresis 0,03%
Output: 2mV/VOn request
-
C10
BUY NOWC10
Force transducers for the measurement of static and dynamic loads in COMPRESSION an TENSION
Nominal Load from 10 kN to 1 MN
Linearity and Hysteresis 0,10% and 0,20%
Standard Output 2mV/V -
C10-AMP
BUY NOWC10-AMP
Force transducers for the measurement of static and dynamic loads in COMPRESSION an TENSION
Nominal Load from 10 kN to 1 MN
Linearity and Hysteresis 0,10% and 0,20%
Standard Output
-
FT1-AMP
BUY NOWFT1-AMP
SHEAR BEAM load cell for the measurement of static and dynamic loads
Nominal Load from 350 kg to 2 tons
Linearity and Hysteresis 0.05% -
TA5F
BUY NOWTA5F
The transmitter makes simple and cheap the remote transmission of the value sampled from strain gauges load cells, torque transducers, etc.. to PLC, PC, recorders, etc… The possibility of internally performing the parallel of the load cells simplifies the system wiring because it does not require the use of any junction box. TA5F is available in two versions: with an hermetic case made of die-cast aluminium (IP65 protection class) or in a plastic case for the mounting on a DIN bar (suitable for control panels). The transmitter has a maxim resolution of ±200.000 divisions, it is ideal for directly connecting the point/site of the measurement to a remote control station, the high conversion speed (up to 300Hz) makes it suitable also for application in real-time. The transmitter is internally controlled by a microcontroller in Flash technology which first processes the data coming from the ratiometric AD converter and then manages the serial communication. The transmitter can work as Slave (it transmits the value only on request) or as Master (it transmits the value continuously). Outputi: RS232C and RS485 Modbus
-
TDA
BUY NOWTDA
The digital transmitter TDA is an instrument designed for the processing of signals from strain gauges in full bridge configuration with 4 or 6 wires and is able to interface with most of the main common field buses such as Modbus RTU, CANopen, DeviceNet and Profibus. For the fieldbus CANopen, Devicenet and Profibus the electronic is galvanically isolated. Besides the selected fieldbus, it has a RS232 serial interface with a communication program already SUPPLIED (WinTDA), allows a fast tool to control the effectiveness of the performance of the transmitter and allows to implement the calibration procedures. Outputi: RS232C – RS485 ModBus – CanOpen – DeviceNet – ProfiBus
-
UPFT1
BUY NOWUPFT1
WEIGHING UNIT for Load Cell model FT1 Used in weighing tanks, silos and hoppers
Nominal loads from 350 kg to 5 tons -
CM
BUY NOWCM
Force transducers for the measurement of static and dynamic loads in COMPRESSION.
Nominal Load from 50 kg to 5 tons
Linearity and Hysteresis 0,20%
SMALL SIZE
Standard Output 2mV/V -
CM-AMP
BUY NOWCM-AMP
Transductor de fuerza de COMPRESIÓN para la medida de cargas estáticas y dinámicas
Carga nominal de 50kg a 5t
Linealidad e histeresis 0.20%
DIMENSIONES REDUCIDAS
Sensibilidad nominal 2mV/V -
FT2
BUY NOWFT2
SHEAR BEAM load cell for the measurement of static and dynamic loads.
Nominal Load from 500 kg to 10 tons
Class (OIML R60) C2 and C3
Combined Error: 0,019%
Output: 2mV/VOn request
-
SG4
BUY NOWSG4
Junction box is used to make weighing, dosing and plants controlling easier, whenever connecting load cells in parallel is necessary, in order to have a single output signal which represents the sum of the signals of connected load cells. Also available ATEX version
-
FT6
BUY NOWFT6
OFF CENTER load cell for the measurement of static and dynamic loads
Nominal Load from 5 kg to 100 kg
Class (OIML R60) C2
Combined Error: 0,028%
Output: 2mV/V -
FT8P
BUY NOWFT8P
DOUBLE SHEAR BEAM load cell for the measurement of static and dynamic loads
Nominal Load from 10 ton to 20 tons
Linearity and Hysteresis 0.05%
Output: 2mV/V -
MP2E
BUY NOWMP2E
Panel digital indicator designed to be used in the modern static and dynamic measure systems of industrial field of activity. Suitable for processing analog signals coming from strain gauge load cells and torque transducers or by pressure and torque transmitters, it allows to perform measurements with a long-term accuracy of 0.01%with a resolution of ±50.000 divisions at 2mV/V. At your inside the instrument works with ±500.000 divisions. All the calibrations (Zero, Full Scale, Analog output, Sensibility, etc.) are digital (no trimmer), therefore they can be performed and repeated without the need of removing the instrument from the panel and without to open it. Accuracy 0.01%
-
TCETM
BUY NOWTCETM
Force transducers for the measurement of static and dynamic loads in COMPRESSION and TENSION
Nominal Load from 5 kN to 100 kN
Class (ISO 376) 00, 0.5 and 1
Linearity and Hysteresis 0,03%
Output: 2mV/VOn request
-
FT9
BUY NOWFT9
DOUBLE SHEAR BEAM load cell for the measurement of static and dynamic.
loads Nominal Load 15 ton
Linearity and Hysteresis 0.10%
Output: 2mV/V -
TSTM
BUY NOWTSTM
Force transducers for the measurement of static and dynamic loads in COMPRESSION and TENSION
Nominal Load from 500 N to 5 kN
Class (ISO 376) 00, 0.5 and 1
Linearity and Hysteresis 0,025%
Output: 2mV/VOn request